Image may be NSFW.
Clik here to view.
Regular Woodsmith readers will recognize the Classic Cherry Bed in the photo. It complements several bedroom furniture projects that have been published by Woodsmith. But wait, something is not quite right. Can you guess?
The bed was built by WoodNet Forums member Borderline. He says, “This bed is a combination of many plans I have seen. Many of the features are from the Woodsmith plans (classic cherry bed), however, I did not curve the upper rails and all of the slats are real M&T joints. The side rails are 1.5″ thick and attached with KD fasteners (the mortise type, not surface mount). The rails on the headboard/footboard, the side rails and the legs are all laminated from 4/4 stock and “veneered” with 1/16th shop sawn ‘Veneer’, the rails are also capped with a decorative piece that hides the lamination.”
